Tikkurila Ultra Classic Semi-Matt Exterior Wood Paint

Opaque colour for exterior timber

Tikkurila Ultra Classic is a water-based polyacrylate exterior wood paint with an opaque semi-matt finish. Designed for suitable exterior timber, it combines a flexible, water-vapour-permeable coating with weather resistance described in the supplied product information.

Picture a timber-clad home refreshed in a rich muted colour, or a garden building given a coordinated exterior. Ultra Classic creates a solid-colour appearance rather than the translucent effect of a wood stain, while allowing the texture of the timber to remain part of the look.

Why choose Ultra Classic?

• Semi-matt appearance: an opaque colour finish for exterior timber.
• Polyacrylate formulation: described as flexible and water-vapour permeable.
• Weather resistance: developed for exterior wood exposed to outdoor conditions, as part of a correctly prepared coating system.
• New and previously coated timber: the supplied information includes untreated, factory-primed and previously painted wood, subject to compatibility and preparation.
• Size choices: this listing offers 1L, 3L and 9L options.

Choose your colour and pack

Select the appropriate 1L, 3L or 9L option and confirm your required shade before ordering. The supplied information describes a wide choice of tintable colours. Assess a physical sample outdoors where possible, as daylight, surroundings and surface texture affect colour appearance.

The genuine photograph shows Ultra Classic range packaging marked 9L. Packaging may differ for smaller options; check the selected pack and current manufacturer base-fill information.

Suitable exterior projects

Consider Ultra Classic for suitable exterior timber projects such as wood cladding, following the manufacturer's recommendations. Identify the timber, construction detail and existing coating before choosing your system. Do not assume a wood paint is suitable for decking, walking surfaces, submerged timber or every door and window detail without checking the current technical data.

Preparation and priming

Make sure timber is sound, clean and sufficiently dry for painting. Remove loose or failing coatings, deal with contamination using the recommended preparation method and address decay or moisture problems before decorating.

The supplied information recommends Ultra Primer as part of the system. Follow current manufacturer instructions for bare wood, factory-primed timber and maintenance painting rather than assuming one preparation method suits every surface. Pay attention to end grain, joints and vulnerable details as directed.

Coverage and application

Indicative coverage in the supplied information is 4–6m² per litre on sawn wood and 7–9m² per litre on planed wood. Actual coverage depends on texture, absorbency, preparation and application. Allow for the full specified number of coats.

The listing describes brush, roller and spray application. Check the current technical data sheet for the recommended method, tools, any thinning and finishing technique for your substrate.

Drying and weather planning

The supplied guidance lists touch drying after approximately one hour and recoating after 2–4 hours. These are indicative times, not a guarantee for every outdoor condition. Follow the current manufacturer's temperature, humidity, timber-moisture and weather requirements, including protection from rain or dew during drying.

Inspect and maintain painted timber as recommended. A flexible coating does not repair decayed wood or guarantee that timber movement cannot cause cracking.

Frequently asked questions

Is Ultra Classic a stain?

No. It is described here as an opaque exterior wood paint, producing solid colour rather than a translucent stained appearance.

Is the finish fully matt?

Ultra Classic is listed as semi-matt. If you specifically want a matt appearance, compare the current Ultra Matt product guidance before choosing.

Can it go over existing paint?

Previously painted timber is included in the supplied information, but the existing coating must be compatible, sound and correctly prepared. Check the recommended maintenance system first.

Does it remove mould or solve damp timber?

No. Do not treat a protective topcoat as a substitute for cleaning, repairing timber or resolving moisture problems. Follow the manufacturer's preparation guidance before coating.

Are the outdoor scenes exact colour previews?

No. The AI-generated cottage and garden-studio scenes are illustrative decorating inspiration, not exact Tikkurila colour matches or photographs of verified Ultra Classic applications.

Contact Bespoke Decor NI with your timber type, existing coating and project requirements if you need help finding the relevant manufacturer guidance.